AVer EH1116H-4 series quick guide - Manual (Page 10)

6
III. Using the DVR System for the First Time
1. Connect the mouse to DVR unit (through USB port).
2. Connect all necessary external devices.
DVR unit doesn’t supply the power to connected external devices.
3. Plug the power to turn on the DVR unit.
4. Please wait for a while until start up process is completed. And then, the preview screen will show
up on surveillance screen.
5. Format hard disk: If the hard disk is first time installed in the DVR unit, please format the hard
disk. Following the below steps to format the hard disk.
i
- Before formatting hard disk, please stop recording.
- While formatting hard disk, the CPU usage will be near to 100% and might slow down
the DVR system response.
a. Click Setup and enter the password (If this is the first time, enter the default password
[admin]. The default ID [admin]).
b. Click System → Add