AVer IWH3216 Touch3216 Touch II quick guide - Manual (Page 6)

4
IWH3216 Touch II
The DVR unit can support up to 4 SATA hard disks. Follow the illustrated instructions below to install
the hard disk:
1. Push the lock to open the HDD drawer. 2. And then, pull out the HDD drawer from
DVR unit.
3. Open the HDD drawer case cover and
takes out the accessories kit (key &
screws).
Accessories kit
4. And then, place the SATA hard disk inside
the HDD drawer.
5. Turn the plate and hard disk over carefully
and secure the hard disk inside the HDD
drawer. Use the screw has flat head.
6. After screwed hard disk, turn the HDD
drawer over and close the case cover.
The hard disk
’s connect interface
should be placed in this side of
HDD drawer.