Install the camera in lan – AVer SF0311H-Z10 IP Cam User Manual
Page 13
Advertising
9
Install the Camera in LAN
1. Plug an Ethernet cable into the Camera.
Connect an Ethernet cable to the LAN socket located on the camera
’
s rear side and connect it to the
network.
2. Connect the external power supply to Camera.
Connect the attached power adapter to the DC power jack of the camera.
[Note] Use the power adapter (12VDC) included in the package and connects it to wall outlet for AC power.
After user install and turn ON SF0311H-Z10, and the power LED will be light on. While the power LED
(ORANGE color) light on, it means the system is booting up successfully. Furthermore, if you have a proper
network connection and access to the camera, the LED will flash in BLUE.
Power Cable
Ethernet Cable
Advertising