AVer SF2012H-C user manual - Manual (Page 31)

27
System > Network Setting >Other 1
User may need to assign different port to avoid conflict when setting up IP assignment. Click Apply to
save the configuration.
HTTP Port: setup web page connecting port and video transmitting port (Default: 80)
UPnP Support: This IP camera supports UPnP, if this service is enabled on your computer, the
camera will automatically be detected and a new icon will be added to “My Network Places.”
[Note] UPnP must be enabled on your PC.
Please follow the procedure to activate UPnP.
1. Open the Control Panel from the Start Menu.
2. Select Add/Remove Programs.
3. Select Add/Remove Windows Components and open Networking Services section.
4. Click Details and select UPnP to setup the service.
5. The IP device icon will be added to “My Network Places”.
6. User may double click the IP device icon to access IE browser.
UPnP Port Forwarding: If the IP camera is set up behind the firewall, please select YES to
enable it.
RTSP Server: Enable/disable RTSP function. The Real Time Streaming Protocol (RTSP) is a
network control protocol designed for use in entertainment and communications systems to control
streaming media servers.
RTSP Port: setup port for RTSP transmitting (Default: 554)
RTP Start and End Port: in RTSP mode, you may use TCP and UDP for connecting. TCP
connection uses RTSP Port (554). UDP connection uses RTP Start and End Port.
ONVIF: User can enable ONVIF standard and select the ONVIF version or disable it.