AVer FD2000 - Manual (Page 32)

28
Name Function
(5) Network Camera
Reboot
Turn the IP camera off and on again.
(6) Firmware Upgrade Upgrade the firmware to the latest version. All camera motions will shut
down during firmware update. Close any other screens before starting a
firmware update. Never disconnect power and LAN cable during the
firmware update process, or an update failure will occur and
maintenance will be required. Rebooting the unit after firmware update
may take approximately 3 minutes.
To Upgrade the IP Camera
Firmware:
1. Download the file from our
website and save it in your
computer hard disk.
2. Click Browse. Locate and
select the file and click Open.
3. Click Apply. Wait till you see
the massage “Update complete” You may now click the Internet
Explorer browser refresh button. The login page will appear.