Crosley Radio Crosley Corsair CR612 - Manual (Page 6)

22
23
25
24
26
The clock time can be set with the power turned on
or off as long as the unit is plugged in. To set the
clock, follow the instructions below.
1 Press the TIME (14) button. The clock display
will begin to flash.
2 Press the FORWARD SKIP (16) button to
set the hour.
Note: There is a PM indicator light that will come
on to denote PM hours.
3 Press the BACKWARD SKIP (17) button to
set the minutes.
4 Once the correct time is set, press the TIME (14)
button again to store the time.
5 To switch between 12H and 24H mode, press
and hold the TIME (14) button.
This unit features dual alarms. You can set each
alarm to wake you at different times. The alarms can
be set with the power turned on or off as long as the
unit is plugged in. To set the alarm(s), follow the
instructions below.
To set Alarm 1
1 Press Alarm 1. The clock display will switch to
alarm time and start to flash. The Alarm 1 LED
will come on.
2
Press the FORWARD SKIP (16) button to
set the hour.
Note : There is a PM indicator light that will come
on to denote PM hours.
3
Press the BACKWARD SKIP (17) button to
set the minutes.
4
Once you have the correct alarm time set for
Alarm 1, press the Alarm 1 button again to turn
the alarm on. The Alarm 1 LED with stay lit.
5
To turn the alarm off, press the Alarm 1 button
again. The alarm will turn off and the LED light
will go off.
6 Once set, the alarm will sound once the clock
reaches the set alarm time for Alarm 1. The Alarm
1 LED will begin to Flash.
7 To turn the alarm off while it is going off, press
the Alarm 1 button.
To set Alarm 2
1 Press Alarm 2. The clock display will switch to
alarm time and start to flash. The Alarm 2 LED
will come on.
2 Press the FORWARD SKIP (16) button to
set the hour.
Note : There is a PM indicator light that will come
on to denote PM hours.
3 Press the BACKWARD SKIP (17) button to
set the minutes.
4 Once you have the correct alarm time set for
Alarm 2, press the Alarm 2 button again to turn
the alarm on. The Alarm 2 LED with stay lit.
5 To turn the alarm off, press the Alarm 2 button
again. The alarm will turn off and the LED light
will go off.
6 Once set, the alarm will sound once the clock
reaches the set alarm time for Alarm 2. The
Alarm 2 LED will begin to flash.
7 To turn the alarm off while it is going off, press
the Alarm 2 button.
Note : The alarm will wake you to Radio, CD or
Buzzer. Turn the FUNCTION SWITCH to your
desired wake up mode. You can set this mode
with the radio on or off. In the case of power
outage, the alarm will wake you to Buzzer if the
battery is installed. The alarm will sound for 60
minutes if not stopped manually by pressing
Snooze or by turning the alarm off.
Clock & Alarm Operation Control Locators
Unit Controls
22 Snooze
23 CD Door Open
24 FM Wire Antenna
25 Battery Cover
26 AC Power Cord
8 5
Setting The Clock
Setting The Alarm