Salter Brecknell 3700LP - Manual (Page 10)

10 3700LP Bench Scale Series User’s Manual
Notes: Numbers 1 - 4 below are referenced in the protocol tables under
NOTES:
1. The decimal point position may be different depending on selected
capacity and division.
2. A space character is added to bring character count to the same as
capacities with a decimal point.
3. A status byte is sent if the scale is in motion, under zero, over capacity or
the scale is at center-of-zero.
ProBench Scale Status Byte Formats
High Order Byte [H]
BIT: 7 6 5 4 3 2 1 0
In motion
At zero
Not used
Not used
Always = 1
Always = 1
Always = 0
Parity bit
Low Order Byte [L]
BIT: 7 6 5 4 3 2 1 0
Under Cap.
Over Cap.
Not used
Not used
Always = 1
Always = 1
Always = 0
Parity