Salter Brecknell HS-200M User Manual

Page 3

Advertising
background image

3

1. Lay the pillar on a table (Fig.3)
2. Disassemble the wires on the levers.
3. Insert the wrench to the small hole in front of the steelyard rod, and pull the

hook of steelyard rod with the hook of wrench (Fig. 3-1)

4. Push the long lever frontward, then hook the bearing of the steelyard rod on the

pivot of the long lever (Fig. 3-2)

5. Take away the wrench form the draft rod (Fig.3-3)
6. Put the scale on ground gently

III.

Height rod Installation (Fig.4):

Advertising
See also other documents in the category Salter Brecknell Scales: