Salter Brecknell CP103 - Manual (Page 25)

CP103 Thermal Printer User Instructions 23
4. If the logo is the correct size a window will appear with three different logo
views. If the size is incorrect, an error will be displayed. Click the [OK] button
to continue or [Cancel] to escape.
5. The file path should be showing in the window. Click the [Download] button.
Auto Print Logo
1. Go to the Testing tab.
2. Under the CMD Testing window (the top window) enter the following command
string:
+SELECT LOGO:n
Where n is the number associated with the desired time and date location.
3. Click on the box to the left of SendNewLine.
4. Click the [SEND] button. The typed in command string will be displayed in the
bottom window if the command was sent.
The CP103 printer also supports full ESC/POS commands which are not listed in this
manual. Refer to the
n Description
0 do not print logo (default)
1 print the first logo
2 print the second logo