Catler MF 8010 - Manual (Page 10)

10
OPERATING YOUR MILK FROTHER MF 8010
Before fi rst use
Before first use, remove and safely discard
all promotional labels and packing materials
attached to the device.
Wash the jug, lid and measuring cap in warm
soapy water and dry thoroughly. Wipe exterior
of appliance with a soft damp cloth and dry
thoroughly.
Place appliance on a flat level surface and plug
power cord into 230-240V outlet and turn power
‘On’.
Frothing hot milk
1. Turn the appliance ‘On’ at the power outlet.
2. Select the ‘Capp’ or ‘Latté’ frothing disc.
Choose ‘Capp’ disc for thick and creamy froth
or the ‘Latté’ disc for smooth and silky milk.
‘Capp’
‘Latté’
3. Insert frothing disc firmly into position onto
the shaft at the base of the jug.
NOTE:
Always ensure frothing disc is firmly in-
serted into jug before adding liquid.
If disc is not inserted correctly it may
dislodge during operation.
WARNING:
FROTHING DISC IS A CHOKING HAZARD.
CHILDREN MUST ALWAYS BE SUPER-
VISED AND NEVER LEFT UNATTENDED
WITH APPLIANCE.
4. Pour the required amount of cold fresh milk
into the jug and cover with jug lid. Always
use cold milk and full the jug between the
MIN and MAX level markings.
MIN MAX
NOTE:
For optimum frothing results, do not
exceed the CAPP/LATTE MAX (500ml)
marking inside the jug.
OPERATING YOUR MILK FROTHER MF 8010
152185_MF_8010_EN_.indd Odd1:10 152185_MF_8010_EN_.indd Odd1:10 6.5.11 16:41 6.5.11 16:41