CellarPro SPLIT AIR HANDLER AH18SX, 15093 - Manual (Page 2)

2
CellarPro Product Nomenclature
– Larger Systems
AH - 36 - SC
Cabinet Configuration / Size
AH = Air Handler
Nominal Cooling Capacity (BTU)
18 = 18,000 BTU / 1.5 Ton
24 = 24,000 BTU / 2 Ton
30 = 30,000 BTU / 2.5 Ton
36 = 36,000 BTU / 3 Ton
Method of Cooling / Configuration
SC = Self-Contained Air Cooled 1 To 3 Ton
Si = Remote Condenser - Interior 1 To 3 Ton
Sx = Remote Condenser - Exterior 1 To 3 Ton
Our larger cellar systems use the same approach of optimizing compressor size, fin spacing and coil size,
and blower air fan. The goal is to minimize impact on humidity, handle higher loads, yet keep consistent
temperatures. We offer a wide array of modifications, such as networkable controller, humidifier,
and heater.
Cabinet
The housing is manufactured from aluminum for light weight, corrosion resistance and aesthetics. The
cabinet is structurally reinforced throughout to provide a stable and secure platform for the components.
The evaporator section is insulated with high density, 4 lb thermal and acoustical insulation and sealed with
self-extinguishing gasket material. Panels are fastened with quick release hardware to simplify internal
access.
A-Frame Coil
The unit has a large face area coil to increase cooling efficiency and reduce power
consumption. The copper tube, aluminum fin coil is mounted in a stainless steel
condensate pan with a condensate safety switch to guards against condensate
overflow.
Blower and Blower Motor
Our units incorporate a blower and motor in a draw-thru configuration for even air
distribution across the coil. The large blower runs at a low rpm to minimize air noise
and motor horse power consumption. The blower assembly is mounted to an
internal chamber to further reduce noise levels.
CellarPro Standard Design Features