CellarPro 4200VSX WINE COOLING UNIT (EXTERIOR), 1080 - Manual (Page 24)

24
Energy Saver Button
To activate and deactivate the “Energy
Saver” mode, press the “Energy Saver”
button.
The “Energy Saver” indicator light will turn
on when the cooling unit is in “Energy
Saver” mode.
In “Energy Saver” mode, the Minimum Set
Point increases 4°F and the Temperature
Differential is unchanged.
Quick Chill Button
To activate the “Quick Chill” mode,
press the “Up” / “Quick Chill” button for
three seconds.
To deactivate “Quick Chill”, press
“Quick Chill” button for three seconds
again.
The “Quick Chill” indicator light will turn
on when the cooling unit is in “Quick
Chill” mode.
In the “Quick Chill” mode, the cooling
unit will run continuously for 6 hours (or
until the intake temperature registers 50°F).
This mode is useful after loading “warm”
bottles in a cellar