BoonDocker YAMAHA YZ-F: YZ450F - Manual (Page 2)

Revised 1/14/2014 Page 2 of ?
www.boondockers.com………………..... ……….………………....877-522-7805
1. Remove seat, panels, tank, air box, silencer &
header.
2. Mount control box to handle bars. Route
along stock wire harness to the air box area.
3. Remove air box components. Routing
harnesses with the stock wiring harness Zip
tying as needed. 4. Install filter cover & oil feed line. Route line
through frame to the sub frame & zip tie as
shown above .
5. Install drain line to stator cover here as shown
above, and route through to right side of
Timbersled frame as shown. 6. Cut left side of fender to fit actuator and boost
line. Cut 1” from the bottom of the fender to
clear for the intercooler and inlet to fit.