BoonDocker YAMAHA WR-F: WR450F - Manual (Page 5)

Revised 3/19/2014 Page 5 of 5
www.boondockers.com………………..... ……….………………....877-522-7805
19.Install the turbo flange gasket between flange
& inlet with supplied bolts & nuts. Tighten all
the bolts, adjust the muffler, clamp the turbo
bracket to the muffler & align. 20.Tighten inlet to header clamp. Cut the side
panels to fit around the muffler or heat tape the
back of the side panel.
21.Cut the left side panel to fit the BoonDocker
air filter. Install the air filter. Install the tank &
all body parts. 22.Install & trim the crank case vent line to keep
from freezing. Remove oil feed line from the top
of the turbo & Start engine & check oil flow.
Top off oil Tighten oil feed line.
23.Start bike & inspect turbo install & check
tightness on all components. 24.