Uick, Pecs, Compaq storageworks enterprise backup solution – Compaq DA-10242 User Manual

Page 3: E b s a, E b s i

Advertising
background image

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

..

Q

UICK

S

PECS

3

DA-10242-02-009 — 11.15.2000

Compaq StorageWorks

Enterprise Backup Solution

E B S A

D A P T E R S

Fibre Channel Host Adapter (PCI) – 32 or 64 bit

EBS for Workgroups and EBS for Departments
The Fibre Channel Host Controller is a high-speed PCI card that provides server connectivity to the Fibre Channel

Arbitrated Loop or Fibre Channel Fabric (on NetWare). The Fibre Channel Host Controller card is supplied in a kit that

also includes one 5m Multi-Mode Fibre Channel Cable and two Gigabit Interface Converters (GBICs). These GBICs

are required to attach the Fibre Channel cable to the Fibre Channel Host Controller card and to the Storage Hub 7,

Storage Hub 12, Fibre Channel Arbitrated Loop Switch 8 or Fibre Channel SAN Switches.

Compaq StorageWorks 64-Bit PCI-to-Fibre Channel Host Bus Adapter for NT/2000 PCI HBA (Fabric)

EBS for Workgroups, Departments and Data Centers
Compaq StorageWorks 64-Bit PCI-to-Fibre Channel Host Bus Adapter for NT/2000 is a single channel, 64-bit/33-MHz

PCI-to-Fibre Channel Host Bus Adapter (HBA) with an embedded multi-mode (short wave) optical interface. This

HBA is qualified for x86NT platforms configured with the Compaq RA8000/MA8000, ESA12000/EMA12000, NT

Clustered platforms, Compaq Enterprise Backup Solution (EBS) offerings and/or Compaq Fibre Channel Switches

and Compaq Fibre Channel SAN Switches. It replaces the current Compaq PCI to Fibre Channel HBA (380574-001)

in NT environments, which has reached end of life.

Compaq StorageWorks 64-Bit PCI-to-Fibre Channel HBA for Tru64 UNIX, KGPSA-CA PCI HBA (Fabric)

EBS for Data Centers
Compaq StorageWorks 64-Bit PCI-to-Fibre Channel Host Bus Adapter is a single channel, 64-bit/33-MHz PCI-to-Fibre

Channel Host Bus Adapter (HBA) with an embedded multi-mode (short wave) optical interface. This HBA is qualified

for Tru64 UNIX platforms configured with the Compaq RA8000/MA8000, ESA12000/EMA12000, Compaq Enterprise

Backup Solution (EBS) offerings and/or Compaq Fibre Channel Switches and Compaq Fibre Channel SAN Switches.

It replaces the Compaq PCI to Fibre Channel HBA (380574-001) in Alpha environments, which has reached end of

life.

SUN Server Fibre Channel PCI and S-Bus Adapters

EBS for Data Centers
These Fibre Channel Host Adapters provide Sun server connectivity to the Fibre Channel switched fabric. The GLM is

required to attach the Fibre Channel Host Adapter and the FC Switch 8 or 16. The GLM converts digital signals to the

optical signals required in the Fibre Channel environment.

E B S I

N T E R C O N N E C T S

Fibre Channel Storage Hub 7

EBS for Workgroups
A Fibre Channel Storage Hub 7 is a 7-port Fibre Channel Hub that acts as the focal point of the Enterprise Backup

Solution for Workgroups. This storage hub provides up to seven multi-mode Fibre Channel connections. For example,

five servers can be connected to the storage hub leaving one or two available ports for connections to Fibre Channel

Tape Controllers. The storage hub is a rack-mountable unit (with the optional rackmount kit) in a 1U form factor.

Fibre Channel Storage Hub 12

EBS for Departments
A Fibre Channel Storage Hub 12 is a 12-port Fibre Channel Hub that acts as the focal point of the Enterprise Backup

Solution for Departments. This storage hub provides up to 12 multi-mode or single-mode (supported in future release

of EBS) Fibre Channel connections. For example, nine servers can be connected to the storage hub leaving three

available ports for connections to Fibre Channel Tape Controllers. The storage hub is a rack-mountable unit with a 1U

form factor.
Storage Hub 12 Management Option
This is an optional component that provides management for the Compaq Storage Hub 12. It shares the same

physical Fibre Channel cabling and uses a channel (frequency) not shared by the Fibre Channel protocol, thus there

is no loss in data integrity or bandwidth. Utilizing out-of-band communication, the module allows master hubs to

monitor and control cascaded hubs without depending on general network availability.

C

O M P O N E N T S

(continued)

MDR Option Kit
152454-B21 (HVD)
162969-B21 (LVD)

SSL2020 AIT Tape Library
(1 or 2 drives x 20 cartridges)
175195-B21 (1) drive (TT)
175195-B22 (2) drive (TT)
175196-B21 (1) drive (rack)
175196-B22 (2) drive (rack)

TL891, DLT Tape Library
(2 drives x 10 cartridges)
120875-B22 (TT)
120876-B22 (rack)

TL895, DLT Tape Library
(up to 7 drives x 96 cartridges)

349350-B2x*
“x” is no. of drives

ESL9326D Tape Library
(up to 16 drives x 326
cartridges)

146205-B21, 0 drives, 326 slots
146205-B23, 6 drives, 326 slots
146205-B24, 8 drives, 326 slots
146205-B25, 10 drives, 326
slots
146205-B26, 12 drives, 326
slots
146205-B27, 14 drives, 326
slots
146205-B28, 16 drives, 326
slots
146209-B21, add on 35/70 drive

Advertising
This manual is related to the following products: