Code 3 Harley-Davidson - Manual (Page 5)

Common Backing Plate and Bracket are used on all
inside-the-rail Side lighting application options.
t57088 Backing plate
t57087 Bracket (Chrome)
NOtE:
All clamping parts of assembly to chrome rails require
(1) anti-vibration pad t56311 to be installed at each
contact point.
“Inside-the-Rail” side lighting options
1. optix 3 up light head
hD3123 2. optix 6 up light head
hD3126
3. tandem leD-X light head
hD3138 4.tandem Xt3 light head assembly
hD311
5. Xt302 light head assembly
hD3102 6. Xt304 light head assembly
hD3104
Inside-the-rail installations should be made with side saddle bags installed, by sliding backing
plates in from forward end of rails. Bolts are installed with threads -out on assy.
hD3102 shoWn
chRome bRackets, backIng Plates & haRDWaRe aRe
common PaRts to all assemblIes shoWn beloW.
Xt302 lIght heaD assemblY
shoWn
NOtE:
t56311 ANtI-VIBRAtION PADS ARE
REQUIRED At ALL BRACKEt MOUNt-
ING POINtS IN CONtACt WItH CHROME
RAILS OF BIKE. (8) ARE INCLUDED IN tHE
ASSEMBLY SHOWN.
t57087 chRome
bRacket
t57088
backIng Plate t15104 button heaD ss bolt
t15105 ss keP nut WIth staR WasheR
hD3126 shoWn InstalleD