Code 3 SuperVisor with TriCore for 2011 Ford Explorer User Manual
Page 4
4
The bracket fasteners in Figures 14 and 15 make excellent hard mounting points for radar
guns and video cameras etc. Caution: Drilling into the housing of the light bar could dam-
age wiring or other internal components.
FIgURE
7
FIgURE
8-DRIVER SIDE SHOwN
FIgURE
9
FIgURE
13
FIgURE
14
FIgURE
15
FIgURE
10
FIgURE
11
FIgURE
12
Installation and Mounting Instructions: Cont.
wiring Instructions
Finish routing the cable as desired. It is advisable to leave an extra loop of cable when installing the light bar to allow for future
changes or reinstallations. Connect the black lead to a solid frame ground (earth), preferably the (-) or ground (earth) side of the
battery, and the power wire to the +12V terminal of the battery. Connect the remaining wires as shown on page 5.
FIgURE
16