Code 3 Warrior - Manual (Page 5)

5
Maintenance
The product is designed for minimal maintenance and trouble free service. Periodic inspection of the product will ensure trouble free
operation. However, occasional cleaning of the lenses is required to sustain maximum light output. Use plain water and a soft cloth, or
Code 3 lens polish and a very soft paper towel or facial tissue.
Should problems arise during installation or during the life of the product, refer to the guide below for information on troubleshooting.
Additional information may be obtained from the factory technical HOTLINE at (314) 996-2800.
Options & Specifications
MODEL H W D WEIGHT
Gladiator™ LCLED™ 1.75" 4.5" 5.5" 1.0 lbs
Warrior™ 3-Up TORUS™ .75" 4.5" 5.5" 1.0 lbs
Warrior 6-Up TORUS™ .75" 7.5" 5.5" 1.5 lbs
Product does not activate a. No power to unit a. Check wiring for loose
connection.
b. Power input wires reversed b. Check power connections
c. Damaged or shorted cabling c. Check cables for damage
PROBLEM PROBABLE CAUSE REMEDY
TROUBLESHOOTING