Code 3 XT308 - Manual (Page 2)

IMPORTANT: Please be sure to check that the product is properly fused. Installing the XT308 LED
light without the appropriate fuse will void the warranty.
Specifications
XT308AS
Input Voltage 11-30VDC
Peak Input Current 4 Amp
Output Power 24 W
Flash Patterns 32
Fuse(User supplied) 5A
STORAGE TEMPERATURE RANGE -40 +90
Mounting
Mount the XT308 LED light using the brackets supplied and user supplied mounting screws.
CAUTION: Be certain that you have selected a mounting location that does not obstruct the driver’s vision and
allows safe operation of the vehicle. Check the chosen mounting location to ensure that the vehicle’s structure
and material is adequate to support the weight of your light.
Operation
ON/OFF FLASH SWITCH : The 3 position rocker switch used to control the LED flash brightness / off states.
CENTER LEFT/SWITCH: The rocker switch to control LED from right to left.
CENTER RIGHT/SWITCH: The rocker switch to control LED from left to right.
Note: Both CENTER switches in UP position puts unit in CENTER operation.