Copernicus E3IN1 - Manual (Page 16)

E3IN1 - Version A - Released 01January 2015 - Copernicus Educational Products Inc.
*Note: Some of these images and wording have been taken from the Espon 595Wi Manual
Step 10 Complete final Calibration step.
When the first calibration test is complete, press the Enter button on the remote control.
The following screen is displayed. Follow the prompts to complete calibration.
Step 11 Rotate projector mount into Floor Mode.
Floor Mode
If dots don’t clear, turn BOTH dails in 1/8 counter clockwise increments until
you are able to clear the dots with your finger.
Epson 595Wi Touch