Copernicus SOSE1 - Manual (Page 7)

4
Install Bottom Stretchers
Align the Stretchers (4 thru holes) with the holes at the bottom of the Rear Frame
Assembly & Front Frame Assembly
- Fasten with four Bolt A’s & Washer D’s
- Tighten Bolts
Align both Bottom Stretchers (no thru holes) with the holes in the Stretcher (4 thru
holes) & the Front Frame Assembly
- Use 2 outside holes
- Fasten with four Bolt A’s & Washer D’s
- Tighten Bolts
Stretcher (4 thru holes) x 2 Bottom Stretcher (no thru holes) x 2
You will need:
(Not to Scale)
x 8 x 8
Actual Size:
A D
!
!
Use 2 outside holes
1
2
1 2
SOSE - Version E - 1 June 2009 - Copernicus Educational Products Inc.