Cuddeback CUDDEVIEW X2 - Manual (Page 7)

To power your CuddeView “ON” push the key
labeled: /JPG.
• To turn CuddeView X2 “OFF”, hold down /JPG button
for 3 seconds.
Power CuddeView X2 On/Off
5 4
After CuddeView X2 powers ON, a Card Status screen
appears which allows you to select between the Source
and Destination cards.
Card status screen
• Yellow box around card indicates active card.
• Red X over card indicates empty card slot.
• Push JPG key to switch between cards when two cards
are installed or to return to card status screen when
viewing images.
• Number below card indicates number of images on
that card. Power (on/off)/JPG key