Cuddeback NOFLASH - Manual (Page 20)

Setting the Event Delay
Event Delay is the amount of time Cuddeback
will wait after recording an event before it will
record another event.
1) Press numerous times until [Event
Delay] is displayed.( figure 64 )
2) Press or to change the setting.
3) The range is 5 seconds to 60 minutes. The
“sec” or “min” indicates if the delay is in min-
utes or seconds. However, the Event Delay
can not be set longer than the Camera Delay.
Viewing the Saved Events
1) Press numerous times until [Events
Saved] is displayed.
2) Press to view the first event.
3) An event will be displayed in this form:
a. Line 1 of display will show the [Event
number] ( figure 65 ).
b. After a few seconds the date and time of
the event will be displayed. ( figure 66 )
4) To display the next event press .
5) To display the previous event press .
6) Pressing and holding or will
advance the displayed event by 10.
7) To return to the [Events Saved] display,
press . ( figure 67 )
38
Event Dela
30 sec
Figure 64
Event 11
1:04 AM
Figure 65
9/27
12:05P
Figure 66
Event Sav
11
Figure 67
39
Clear an Event
1) Display the event as described above.
2) Press to clear the event. While the event
is being cleared, a progress counter will be
displayed. You must wait until this is finished
before you can perform additional operations.
Depending upon the number of events saved,
it can take up to 45 seconds to clear an event.
Clear all Events
You can clear all the events in memory.
1) Press numerous times until [Events
Saved] is displayed.
2) Press , then press until [Clear All
Events?] is displayed.
3) Press and all events will be erased.
Save Events to Compact Flash Card
You can save all the events to the Compact Flash
card. The file name is EVENT.TXT.
1) Press until [Events Saved] is displayed.
2) Press , then press until [Save Events
to Card] is displayed.
3) Press and the events will be written to
the Compact Flash card.
TIP - All events are saved to a file
named EVENT.TXT. New events will
be continually added to the file.
Maximum file size is about 1 MB.
You can open this file with a text
editor (Notepad) or a spreadsheet
program (Excel). To erase this file
you must use your computer or the
Format Card command discussed
elsewhere in this manual. It is OK
to leave this file on the Compact
Flash Card.
NoFlash07OwnerManual 11/6/07 3:26 PM Page 20