Dynojet 198: Kart and ATV Dynamometers - Manual (Page 8)

1 - 4 Document #98234100
Battery
A vehicle starting system is included with your Dynojet
Dynamometer. You will need an automotive battery if you want
to use this feature. The dyno is designed to carry a group 24
deep cycle series battery with a minimum of 600 cold cranking
amps.
Computer Requirements
You will need to provide a computer system to run the WinPEP
software. WinPEP 7 includes complete documentation in online
Help. From the WinPEP 7 menu bar, choose Help WinPEP 7
Help or visit www.winpep.com (accessible with a valid user
name and password).
minimum system requirements recommended systems requirements
• Microsoft® Windows 2000/XP • Microsoft® Windows 2000/XP
• Pentium 800 MHz Processor • 2.4 GHz Processor or greater
• 256 MB of available RAM • 256 MB of available RAM or greater
• one COM port, two COM ports for
Tuning Link
• one COM port, two COM ports for
Tuning Link
• 800x600, 256 color monitor (SVGA) • 1280x1024 256 color monitor
(SVGA) or better
• 1.2 gigabyte hard drive • 1.2 gigabyte hard drive
• 30 MB of available hard-disk space • 100 MB of available hard-disk space
• CD ROM and floppy disk drive • CD ROM and floppy disk drive
• printer, if hard copies are needed • printer (preferably HP DeskJet®)