Dynojet 250: Eddy Current Brake Driveline Upgrade - Manual (Page 8)

Model 250 Eddy Current Brake Driveline Upgrade Installation Guide
D R I V E L I N E U P G R A D E I N S T A L L A T I O N
Remove the Existing Connecting Arms and Couplers
4
3 Remove the four bolts securing the hood to the dyno and set aside. Prop up the
hood.
4 If present, disconnect the wires to the key switch.
5 Remove the hood from the dyno and set aside.
Figure 2: Remove the Hood
key switch