CDA GB RV 701 SS - Manual (Page 31)

31
Before installing the cooker level the appliance by screwing or unscrewing the four adjustable feet fitted
below.
WARNING!
For safety reasons unscrew the feet (from screwed position) to the maximum extent of 5 mm (fig. 35).
Backguard
– Remove the two spacers “A” and the screw “B” from the rear of the cooktop.
– Assemble the backguard as shown in figure 36 and fix it by screwing the central screw “B” and the
spacers “A”.
It is mandatory to install the backguard.
A
B
Fig. 36
B
0
+ 5 mm
Fig. 35