Fig. 13a] [fig. 13b – EFCO S5600 Slope Glazed User Manual
Page 15
EFCO CORPORATION 6/2012 PART NO. Y308
Page 15 of 23
Series 5600 Slope Glazed Curtain Wall Installation Instructions
Section VI: PVC Isolator & Gasket
PVC Isolator and Gasket Application
A.)
Insert appropriate gasket and isolator into rafter and purlins as shown.
(Ref. Figs. 13A & 13B)
B.)
Gaskets can become somewhat deformed during storage in cartons. They should
be removed from cartons and / or rolls several hours prior to use, lay flat or hang
so as to allow for recovery of correct shape. Temperatures should be at least 50
degree to allow for recovery.
C.)
* DO NOT STRETCH GASKETS out of shape. Cut approximately 1/8” longer per
foot and work from ends to the center. Then trim off excess. (Ref. Fig. 14)
[FIG. 13A]
[FIG. 13B]
Interior
Preset
Gasket
Isolator