Elecraft KX3 Assembly Manual Errata - Manual (Page 5)

Page 5 of 5
5. Page A6 (Parts List): Delete the heat sink shown (part number E100446). Insert the following parts at the
bottom of the page.
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT PART
NO.
Enhanced Heat Sink (wrapped) 1 E850677
Thermal Pad
Handle with Care. Do not
remove the protective film from
either side until instructed to do so.
1 E100546
KX3HSMDKT HDWR BAG E850676 (Envelope)
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT PART
NO.
4-40 3/8” (9.5mm) Black Flat Head Screw 2 E700176
4-40 5/8” (15.9mm) Black Flat Head Screw 1 E700307
4-40 5/16” (7.9mm) Black Flat Head Screw 1 E700249
Note that you may find extra screws in your kit that the above screws replaced.