Tools required, Parts supplied – Elecraft KXBC3 User Manual
Page 6
6
Tools Required
1. ESD Protection (see Preventing Electrostatic Discharge Damage, pg 1).
2. #1 size Phillips screwdriver. To avoid damaging screws and nuts, a power screwdriver is not
recommended.
3. Soft cloth or clean, soft static dissipating pad to lay cabinet panels on to avoid scratching.
Parts Supplied
Be sure you have the following components in your kit. If anything is missing, contact Elecraft customer
support (pg 13).
ILLUSTRATION DESCRIPTION
QTY.
ELECRAFT
PART NO.
KXBC3 Module
ESD SENSITIVE! Do not remove
from ESD-Safe Bag without taking
ESD precautions.
1 E850485
CP Board Shield
1
E100444
4-40 3/16" (4.8mm) Black Flat Head
Screw
2
E700173
2-56 5/32” (4.0mm) Black Pan Head
Screw
1 E700170
#4 Lock Washer, Split Ring
1
E700004
4-40 3/16” (4.8mm) Nylon Standoff
1
E700263