Removing the monitor base – Compaq TFT5030 User Manual
Page 11
Product Features
The DVI-D connector on this monitor uses digital video
information to provide higher speed for higher display resolution.
The results are more precise video displays without manually
adjusting screen display quality.
Signal Cables Included:
■
VGA (Analog) to VGA Connector (15 pin)
■
DVI-D Cable (Digital only) to DVI Digital Connector
Removing the Monitor Base
Before you can mount the monitor onto a swing arm or other
mounting fixture, you must remove the monitor from the base.
CAUTION: Before beginning to disassemble the monitor, be sure
the monitor is turned off and the power and signal cables are both
disconnected.
To remove the monitor from the base, complete the following
steps:
1. Lay the front bezel down on a soft area to prevent it from
getting scratched, defaced, or broken.
Compaq TFT5030 Flat Panel Monitor User’s Guide
9