Elecraft KPA3 Manual - Manual (Page 7)

7
ILLUSTRATION DESCRIPTION QTY.
ELECRAFT
PART NO.
Rear Shield 1 E100217
Screw, 4-40, 1/4” (6.4 mm) Zinc, Pan
Head
9 E700005
Screw, 4-40, 1/4” (6.4 mm) Black, Pan
Head
1 E700009
Screw, 4-40, 3/8” (9.5 mm) Black, Flat
Head
1 E700131
Screw, 4-40, 7/8” (22 mm ) Black, Flat
Head
8 E700159
Acorn Nut, 4-40 8 E700160
Standoff, 4-40, 5/16” (7.9 mm) long 1 E700121
Lock Washer, #4 Inside Tooth 4 E700010
Lock Washer, #4 Split 4 E700004
Nut, 4-40 1 E700011
Installation Procedure
K3 KIT BUILDERS: If you were directed here to install the KPA3 module as part of the initial
K3 assembly, begin here to complete the installation. Skip over the steps indicated.
Disconnect power and all cables from your K3.