Elecraft KRX3 User Manual
Page 8
8
ILLUSTRATION DESCRIPTION
QTY.
ELECRAFT
PART NO.
KNB3 SUBIN Board
ESD Sensitive.
1
E850331
KNB3 SUBOUT Board
1
E850332
KRX3 Enclosure, Top (with tall standoffs)
1
E100334
KRX3 Enclosure, Bottom (with short
standoffs)
1 E100334
KRX3 Hardware Bag E850334
ILLUSTRATION DESCRIPTION
QTY.
ELECRAFT
PART NO.
TMP Cable 5” (13 cm)
2
E100282
TMP Cable 10” (25 cm)
1
E850338
TMP Cable 12” (30 cm)
1
E850339
Circular Foam Pad (Self-Adhesive: Do not
remove protective backing until instructed to
do so)
1 E700053
Battery Cover
1
E100343
Resistor, 27 ohm (red-violet-black)
1/8 watt
1 E500336
Typical Standoffs
(May be round or hexagonal)
Standoff, Metal, 4-40 7/8” (22 mm)
2
E700156
Standoff, Metal, 4-40, 1/2” (13 mm)
2
E700061
Standoff, Metal, 4-40, 3/8” (9.5 mm)
2
E700153
Standoff, Metal, 4-40, 1/4” (6.4 mm)
4
E700152
Standoff, Nylon, 5/8” (15.9 mm)
1
E700163