Canon IMAGEPRESS C7000VP - Manual (Page 5)


1. Installation of JDF Connector
1-1. Installing.JDF.Connector.software
Install the JDF Connector software using "EFI Fiery JDF Connector SOFTWARE & DOCUMENTATION V1.6" CD
in the media pack that accompany with imagePRESS Server.
The following table lists the minimum system requirements.
Host Machine PS Controller
Fiery JDF
Connector Device
Capability Files Prinect Digital
Print Maneger Prinect Print
Ready
imagePRESS C7000VP
imgaePRESS Server A3000/A2000 v.1.5.2 SP2
v1.6 or later
3.5.0.29 3.5.721.1
imgaePRESS Server A3100/A2100 v1.6 4.0 4.0
imagePRESS C6000VP imgaePRESS Server A3100/A2100 v1.6 4.0 4.0
imagePRESS C6000 imgaePRESS Server A3100/A2100/A1100 v1.6 4.0 4.0
imagePRESS C1 imgaePRESS Server Q2 v1.6 4.0 4.0
[Note]
The Prinect Digital Print Manager v4.0 and Prinect Print Ready v4.0 is configured to permit a single
connection for the imagePRESS Server.
The following shows the table of function combination applicable with the respective JDF connector version.
Function JDF Connector FJC1.5.2SP2 JDF Connector FJJC1.6
1-sided/2-sided print OK OK
Staple setting OK OK
Punch setting OK OK
Saddle stitching OK OK
Paper cassette setting OK OK
Paper description setting OK OK
Delivery slot setting OK OK
Delivery surface setting OK OK
Color mode setting OK OK
Number of copy sets setting OK OK
Collate OK OK
Shift sort per specified No. of copy sets OK OK
Print No. of copy sets OK OK
BOX&Hold OK OK
Trimming (on one side) OK OK
Tandem delivery OK OK
Screening OK OK
Printing tab on tab paper OK OK