Additional warnings for wireless routers – Cisco 520 User Manual
Page 26
2-2
Cisco Secure Router 520 Series Hardware Installation Guide
OL-12892--01
Chapter 2 Preinstallation Information
Safety Warnings and Guidelines
Warning
Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001
Warning
Ultimate disposal of this product should be handled according to all national laws and regulations.
Statement 1040
Warning
To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord. Statement 1023
Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units;
disconnect the power at the circuit breaker on DC units. Statement 12
Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings,
necklaces, and watches). Metal objects will heat up when connected to power and ground and can
cause serious burns or weld the metal object to the terminals. Statement 43
Warning
This equipment is not designed for making emergency telephony calls when the power fails.
Alternative arrangements should be made for access to emergency services. Access to emergency
services can be affected by any call-barring function of this equipment. Statement 199
Caution
Inline power circuits provide current through the communication cable. Use the cable provided by
Cisco Systems or a communication cable with a minimum of 24 AWG.
Additional Warnings for Wireless Routers
Warning
In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a
minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332
Warning
Do not operate your wireless network device near unshielded blasting
caps or in an explosive
environment unless the device has been modified to be especially qualified for such use.
Statement 245B