Casio LPCW-50 - Manual (Page 22)

21
Connecting to a Power Source and a PC
Use the power cord and AC adaptor that come bundled with the printer
to connect to a power source. Use the bundled USB cable to connect to
a PC.
Important!
Perform the following procedures only after you have installed the CD/
DVD LABEL PRINTER application on your computer (See page 18) .
To connect to a power source and a PC
1. Connect the power cord to the AC adaptor.
2. Connect the USB cable to the USB por t of the PC.
Important!
Be sure you connect directly to the USB port of the PC. Connecting
through a hub or chaining through another USB device may cause
misoperation.
3. Connect the AC adaptor to the printer’s AC adaptor terminal 1, and
then plug the power cord into a household power outlet 2.
1
2
Important!
• Make sure you use a standard household power outlet rated for
the voltage specified on the rating plate on the back of the printer.
• Use only the power cord and AC adaptor that come with the printer.
4. Connect the USB cable to the USB por t of the printer.
• The first time you connect the USB cable, you have to remove the
tape covering the printer’s USB port.
The side with the arrow should be pointing down.