ETS-Lindgren 3180B Broadband Mini-Bicon Antenna - Manual (Page 24)

24 | Mounting Instructions
Using Included Mounting Adapters
The Model 3180B Mini-Bicon Antenna ships with these mounting adapters, used
to mount the antenna to a 4-TR tripod:
 102108 Clamp Block —Uses
standard 7/8 –14 threads and comes
with a 1/4 –20 thread adapter for
mounting to an ETS-Lindgren tripod
or most other tripods.
 100733 Support Rod
 101942B Support Base
To use these adapters to mount the Model 3180B to a 4-TR tripod:
1. Assemble the clamp block, support base, and support rod, and attach
the support base to the 4-TR tripod.
2. Unscrew the clamp block latch and open the top.
3. Insert the balun into the clamp block and close the top over the balun.
4. Move the latch to the closed position and tighten so the balun is held
securely.
5. Attach the cable to the output connector on the antenna.