ETS-Lindgren 2071B Antenna Positioning Tower (Archived) - Manual (Page 21)

Assembly Instructions | 21
1. Place the base of the Model 2070B/2071B in the chamber or other
designated installation location.
2. Place the mast horizontally onto an elevated, stable surface, such as
sawhorses.
3. Carefully slide the carrier unit onto the mast. Orient the carrier so that
when the mast is inserted into the base:

The carrier belt clamp will be directly over the drive pulley on
the motor base; and
 The carrier belt clamp is in line with the mast pulley.
Archived 06/24/14