ETS-Lindgren 3142D BiConiLog Antenna (Archived) User Manual
Page 25
Advertising
![background image](/manuals/636307/25/background.png)
Mounting Instructions
|
25
1. Thread the antenna
feed or receiving
cable through the
center of the boom
so that the antenna
connector emerges
a few inches out of
the clamp end of
the boom.
2. Attach the cable to
the Type N
connector at the
end of the stinger.
3. Slide the cable and
stinger into the
clamp on the boom,
carefully guiding
the cable out the
other end.
Archived 6/19/13
Advertising