ETS-Lindgren 3164-07 Open-Boundary Quad-Ridged Horn (Archived) User Manual
Page 32
To attach the mounting bracket:
1.
Place the antenna in a stable position and location to prevent it from
falling or rolling while attaching the bracket.
2.
Orient the antenna so the H (horizontal) mark is at the side pointing
laterally, and the V (vertical) mark is at the bottom, pointing down.
3.
With the antenna oriented, align the two bracket holes in the mounting
bracket with the two lowest screw holes in the antenna adapter plate.
•
For Model 3164-06 and 3164-07
, align the mounting bracket on the
back of the adapter plate.
•
For Model 3164-08
, align the mounting bracket on the front of the
adapter plate.
32
|
Mounting the Model 3164 Series
Archived 6/25/10
Use only the content for
3164-07 in this manual.
Disregard content for
all other 3164 models;
see ETS-Lindgren
website for other
3164 content.