ETS-Lindgren HI-3510 RF Radiation Badge Broadband Electromagnetic Radiation Detector (Archived) - Manual (Page 12)

HI n 3510 Manual Page — 7
SECTION III
OPERATION
3-1 General Information
The Model HI-3510 can be carried inside outer garments,
fastened to a shirt or jacket pocket, or to a belt using the
clip provided on the instrument. Metallic objects such as
a belt buckle, pen, pencil, etc., could affect the accuracy
of the Model HI-3510. Do not locate the unit near any
metallic object.
NOTE:
The side of the unit containing the clip should always
face toward the wearer's body.
3-2 Safety Precautions
The following precautions should be observed when
entering an area where unsafe radiation levels may be
expected.
1. Turn on the Model HI-3510. Set it to the
"Instantaneous" Measurement Mode as described
in paragraph 3-4-3-2.
2. Enter the area and do a "walk-around". Should
the Model HI-3510 indicate that an alarm
condition exists, take corrective action by turning
off the source of RF power or leaving the area
immediately.
3. Keep the Model HI-3510 turned on and continue
to wear it as long as you are in the area.
Archived 4/2/10