FARBERWARE 104555 Double Burner - Manual (Page 7)

6 7
OPERATION
Before first use
Remove all packaging materials, labels and/or stickers from your double burner. •
Clean your double burner thoroughly before using for the first time ( • Cleaning).
NOTE: Due to the manufacturing process, the double burner may emit a slight
burning odor when it is first activated. Use the double burner in a well-ventilated
area, select the highest setting (ill. ), and allow it to sit for a few minutes without
any cooking utensils.
Operating instructions
This unit is intended for gently boiling water and is not intended to braise, brown
or fry foods. There are 2 heat plate rings on the appliance. The larger die-cast heat
plate is rated at 900W. The smaller die-cast heat plate is rated at 600W. Use the
larger die-cast heat plate for fast cooking, and use the small die-cast heat plate for
simmering or warming.
Before plugging in your double burner, check to ensure that the electrical circuit is
not overloaded with other appliances. This appliance should always be operated on
a separate 120V~ 60Hz, AC outlet.
Place the double burner on a flat, even, and heat-resistant countertop surface. •
Be sure to leave at least 5 inches of space around the appliance for proper •
ventilation (ill. ).
Insert the plug • (3) into the wall outlet. The blue power-on indicator light (8)
illuminates immediately (ill. ).
Put a pot or pan on the center of one die-cast heat plate • (1) (ill. ). Always use
a pot or pan the same size as the die-cast heat plate (ill. ). Do not use pots or
pans that are unstable and easily tipped (ill. + ).
Turn the temperature control dial • (6) clockwise from the off position to the
desired setting (from LOW to HIGH) (ill. ). When one die-cast heat plate is
working, the red work indicator light (7) beside the working die-cast heat plate
illuminates.
When you are done, turn the temperature control dial • (6) to off position
(ill. ).
When not in use, unplug the double burner from the wall outlet to make sure •
that it is completely off. The power-on indicator light (8) goes off. This helps
prevent accidental burns.
OPERATION
CAUTION: This appliance generates heat and steam during use. Proper precautions
must be taken to prevent the risk of burns, fires, or other injury to persons or
damage to property.
CAUTION: The metal surfaces of the double burner and pots/pans will get hot. Do
not touch while in use (ill.
i
). Allow the appliance to cool for at least 30 minutes
before handling.
CLEANING
Proper maintenance will ensure many years of service from your appliance.
Clean the double burner after every use. This appliance contains no user serviceable
parts and requires little maintenance. Leave any servicing or repairs to qualified
personnel.
CAUTION: Before cleaning and storing, turn the temperature control dial (6) to the
fully counterclockwise position (ill.
d
). Unplug the double burner from the wall
outlet to prevent electric shock, and let the double burner cool down completely.
Use a damp, soapy cloth or sponge to clean the surface of the double burner •
(ill. g ).
Kind of soiling Procedure
light soiling wipe with a damp cloth or sponge
sticky soiling scrape off and wipe with a damp cloth
lime residue
(caused by over boiling water)
remove with vinegar or a mild
detergent
Do not use chemical abrasive cleaners, steel wool, or scouring pads. •
Wipe soap completely from the die-cast heat plate • (1) and heat plate ring (2)
after cleaning.
WARNING: Never immerse the appliance in water or other liquids.
Double Burner_104555_IM_US_V2_121204.indd 7 12/4/12 10:07:41 AM