Trouble shooting, Warranty – Fat Shark DominatorV2 User Manual

Page 12

Advertising
background image

Fat Shark

12

RC Vision Systems

Trouble shooting

Observation Possible

cause/solution

No image, display is completely
dark

- No power supplied. Check power connections.

No image, display is glowing
dark grey

- If using wireless module, turn on RX power on bottom of
headset.
- If using AV in cable, check video source.
- Ensure TX is on and camera connections solid

Lots of interference lines
(horizontal lines) with 2.4Ghz
receiver

- Choose a cleaner channel.
- Change to 5.8Ghz AV
- Check correct frequency antenna is used

Poor image, dark or not enough
contrast

- Adjust display with contrast/brightness button

Lots of interference lines
(horizontal lines) when using
5.8Ghz receiver

Check to see if cause is harmonic interference from
2.4Ghz RC controller (turn radio on/off).
- Use CH1 on TX/headset (Ch1 not affected by 2.4Ghz)
- check correct frequency antenna is used

Head tracker not working
(no response or beeping)

- Ensure module pins are aligned correctly into headset
socket

Short range

- Ensure correct antenna are installed
- Check for other sources of interference
- Ensure transmitter has clear LOS to headset. Test in
wide open area, away from any obstructions

HDMI doesn’t work

- 720x480 not supported by host device.
- Incorrect display settings (when connected to computer,
make sure output to alternative monitor is selected)
- Faulty HDMI cable
Before concluding the HDMI is faulty, test with alternative
HDMI source and cables

White dots on LCD display

You were careless and left goggles exposed to sun. Sun
burnt off LCD color filter.

Lens fogs up

Cooler optical lens are heated by your humid face
causing condensation. Pre warm goggles by wearing on
head or storing in warm location.

Head tracker does not work
(can enter menu)

- Radio doesn’t support selective trainer function
- Settings incorrect
- Trainer switch on RC controller not activated
- in Pause mode

Head tracker drifts or has
excessive error correction
(jumpy)

- Operating inside so compass sensor not correct (use
outside)
- RC radio interfering with compass sensor (keep RC
controller antenna away from headset
- Standing near large metal object (such as a car)

Warranty

The system can be exchanged for a new unit within 7 days for any manufacturing defects if
returned in new condition. The video headset will be warranted for repair for 2 years if no
signs of excessive use. Buyer will be responsible for shipping costs. If beyond the warranty
period we will provide repair services.

Advertising