FBT DLM26 User Manual
Page 5
MENU “Input A/B” Input Channels Editing [Access by pushing the “A/B” buttons]
NAV/Param.1 Encoder
NAV/Param.1 Enc.
Param.2 Enc.
Param.3 Enc.
[to navigate between menus]
[to chose values for the parameters, no need to confirm the chosen values,
which are automatically loaded during the encoders use]
1. Input A/B
Gain
Gain = + 0.0 dB
-> Gain = + 0.0 dB
Param.1 N/A
-12 db
Same as PAR2
:
+6 dB
2. Input A/B
Delay
Delay = 0.000 ms
-> Delay = 0.000 ms
Param.1 N/A
000.0000mS
000.0000mS
[1 ms steps] [20.8 us steps]
848.0000mS
000.9984mS
3. Input A/B
EQ Byp
EQ Bypass = Off
-> EQ Bypass = Off
Param.1 N/A
Off
Same as PAR2
:
On
4. Input A/B
EQ-X (X from 1 to 5)
Byp = Off Type = Y (Y = Peaking_Eq, Hi-Shelv_1, Hi-Shelv_2, Hi-Shelv_Q, Lo-Shelv_1, Lo-Shelv_2, Lo-Shelv_Q,
Lo-Pass_1, Lo-Pass_2, Lo-Pass_Q, Hi-Pass_1, Hi-Pass_2, Hi-Pass_Q, All Pass_1, All Pass_2,
Band Pass, Notch Filt)
-> Byp = Off Type = Y
Param.1 N/A
Off
Peaking_Eq
:
:
On
Notch Filt
Through the Param.2, it is possible to Byp the single selected filter.
Through the Param.3, it is possible to select one of the 17 available
filters' type.
Once selected the filter Type and NOT in Byp mode, pressing
again the ENTER button can be accessed the selected filter's editing page.
4.1 Input A/B
EQ-[x] (X from 1 to 5)
-> Byp = Off Type =
Y
4.1a.
If selected a
Peaking_Eq
filter, then the filter can be set by
the following parameters
Input A/B
EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
[Freq.] 20Hz
[Amp.] -15.0 dB
[Q] 0.30
:
:
:
20kHz
+15.0 dB
20.00
4.1b.
If selected a
Hi-Shelv_1
(first order High Shelving) filter,
then the filter can be set by the following parameters
Input A/B
EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q= ----
[Freq.] 20Hz
[Amp.] -15.0 dB
[Q] ----
:
:
:
20kHz
+15.0 dB
----
4.1c.
If selected a
Hi-Shelv_2
(second order High Shelving) filter,
then the filter can be set by the following parameters
Input A/B
EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q= ----
[Freq.] 20Hz
[Amp.] -15.0 dB
[Q] ----
:
:
:
20kHz
+15.0 dB
----
4.1d.
If selected a
Hi-Shelv_Q
(variable Q High Shelving) filter,
then the filter can be set by the following parameters
Input A/B
EQ-[x] (up to 5 filters available)
[Freq] [Gain] [Q]
-> 1000Hz +0.0dB Q=1.00
[Freq.] 20Hz
[Amp.] -15.0 dB
[Q] 0.30
:
:
:
20kHz
+15.0 dB
20.00
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC
ENTER
ESC