FBT MBT 6000 - Manual (Page 3)

REMOTE CONTROLS UK
MIC
OFF
LOCK
MOM
ALL 1 2 3
4 5 6
MBT 6000
SIMPL Y
NETWORK
CHIME
SETUP
IN
VOL. MAST.
1 2 3 4
ON
MADEINITALY MBT 6000
SIMPL Y
AUXILIARY
L R
MBT 6000
Configuration table for pre-call chimes (DIN DON)
MIC REMOTE CTRL
M I C 1 M I C 2
GAIN
PH
24V PRIORITY AUX M I C 1
70 30 dB
The MBT 6000 microphone console is used as a remote control
for zone and message selection and is for usage with the MMZ
6020 / MMZ 6000 FBT Audio Contractor matrixes only which
function as power supply for the console itself.
NETWORK
CHIME
SETUP
IN
VOL. MAST.
1 2 3 4
ON
MADEINITALY MBT 6000
SIMPL Y
AUXILIARY
L R
1)
2)
3)
4)
5)
Three-position switch; when in central position (OFF) the
microphone console is deactivated; when in LOCK position the
switch is firm; when in MOM position the console remains active until
the switch is released.
When the LED lights up, the microphone signal is on the output.
The ALL function allows to play a message in all the audio zones of
the system, by interrupting the background music if present; zone
activation is signalled by the relevant LED switching on.
Buttons for the selection of the zone where the microphone
messages shall be played; zone activation is signalled by the relevant
LED switching on.
CINCH RCA jacks for the connection of an auxiliary source (e.g.
CD player); in this case the microphone console can be used as a
local station in a single zone.
1
2
3
4
CD PLAYER
5
Features
Directivity
Frequency response
Sensitivity
Output impedance
Material
dynamic microphone
cardioid
100Hz ÷ 12kHz
-75dB ±3dB
500 Ohm
ABS with steel base CODE: 31929
START END START END START END START END START END START END START END START END START END START END START END START END
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON
1 2 3 4
ON