FEISOL CM-1471 Monopod - Manual

© FEISOL INC, USA
WWW.FEISOL.NET
Page 1 of 3
User Manual ► FEISOL CM-1401 and CM-1471
A.
Interchanging the Mounting Screw Size
The size of the pre-installed Mounting Screw on the monopod CM-1401 is ¼”, while the size
of the pre-installed Mounting Screw on the monopod CM-1471 is 3/8”. In order to attach
Ball-Heads or other accessories which require a different size, the Mounting screw is
reversible and features both common screw sizes on its two ends (see picture).
To reverse the screw, use the included ¾” socket wrench to loosen the ¾” nut at the center
of the base, and remove it by hand. Re-attaching it upside-down, again using the socked
wrench, will expose the different size thread on the other end. Caution: Over-tightening the
screw can damage the threaded hole of your monopod.