Accessories overview – Fiilex Q500 User Manual
Page 7
Advertising
Accessories Overview
5
The Q500 is equipped with two ways of attaching accessories: Magnetic Mount (4) and
Size 3 Accessory Holder (3).
See website for additional accessories. www.fiilex.com
MAGNETIC MOUNT (4)
SIZE 3 ACCESSORY HOLDER (3)
Size 3 accessories are designed to attach to the Q500 by sliding into the Size
3
Accessory Holder (3) from the top side and then secured with the Top Latch (2).
Two magnets are located on the outer diameter of
the Light Source (5). Fiilex Magnetic Accessories
will mount onto the Q500 when the 5-inch Fresnel
Lens has been removed. Not all accessories are
designed to handle the intense output of the Q500.
Do Not use the Magnetic Gel Holder with the Q500.
Advertising