Fiilex P360EX - Manual (Page 9)

7
For additional accessories go to www.fiilex.com
Optional Accessories
When using light for the first time, remove the plastic
protective membranes and discard.
Mount Light Stand Adapter(O) to 5/8 Stud on light stand or
tripod.
Insert the DC power plug from the power adapter into the DC
Power Input Jack (J).
Connect the Power Adapter to AC Power.
Press On/Off button (K) to turn on P360/EX.
Adjust the color temperature with CCT Tuning Knob (L).
Adjust the Intensity with the Light Intensity Knob (H).
Slide Barndoor into the Barndoor Slot (B) until it clicks into
place.
Following Steps for P360EX model only.
Mount the DMX Connection Box with the Power Adapter
Holder to the light stand or tripod. Secure with the Stand
Fastener Knob.
Slide the Power Adapter into the cradle of the Power
Adapter Holder and tighten the Velcro Strap.
Insert Connection Plug into Light Control Input Jack on the
P360EX (M).
Connect to DMX controller via XLR5 (D) or RJ45 (C) ports in
the DMX Connection Box.
Rapidly push the thumbwheel (F) two times to unlock.
Seven-segment Display (B) will start to flash, you can now set
the DMX Address.
To set the DMX address, slide the thumbwheel (F) up to
increase the number, and down to decrease.
Once set, push the thumbwheel (F) once in to lock.
D-tap Cable
Dome Diffuser Fresnel Lens
Power Adapter Holder DMX Connection Box
Softbox
For P360EX Only