Fotodiox Pro Highkey - Manual (Page 3)

4 3
Remove the handle screws
from the Strobe Holder and
slide it through the big holes
on the bracket.
Make sure it’s facing up.
3 4
5
Insert the Softbox Holders
to each end of the Strobe
Holders and lock with
handle screws.
Repeat for the other side.
The finished Bracket and
Holders should be mounted
on both poles by now;
tighten every handle.
Both sides should
look like this.
a
ssembling the
h
ighkey
1 2
The Frame
Insert the Pole into
the base and lock
with handle.
Repeat with
second Pole.
Insert the bracket
and rotate so that
both brackets
(big handle) face
each other when
mounted.
*Handle