Gastroback 42812 Design Bistro Oven Advanced 28L - Manual (Page 11)

NOTE: Cooking can be temporarily interrupted at any time by pressing the stop-button
(practical if the food needs turning). When cooking is temporarily interrupted, the light
inside the oven goes out, and the remaining cooking time will flash on the display. Cooking
is recommenced by pressing the start-button again.
Once the cooking time set has elapsed, the oven will beep 3 times and then switch off auto-
matically. The light inside the oven will go out and the display will return to showing the
clock.
NOTE: If the stop-button is held down during setting, the oven will beep once, the program-
ming is reset, and the display returns to showing the clock.
9. Open the oven door once the cooking procedure is finished and take out the food using
oven gloves.
ATTENTION: The oven is very hot during operation. Do not let your skin touch any sur-
face.
NOTE: Empty the crumb tray after every use and clean the used accessories. This way you
can be sure that no leftover food is getting burned or set on fire. Never use the oven with-
out the crumb tray in proper position.
Functions
Heat from above and below
1. Press “FUNCTION”, and the icon will light.
2. Turn the switch to select heat from above and below. The icon will light.
3. Press “TEMP/WEIGHT” and turn the switch to set the temperature.
4. Press “TIME” and turn the switch to set the cooking time.
5. Press “START”. The oven starts working and the LED begins to count down time. The icon
will light.
6. When cooking is finished, it will beep 3 times, and the LED will turn back to waiting
state.
Convection
1. Press “FUNCTION”, and the icon will light.
2. Turn the switch to select convection, the icon will light.
3. Press ““TEMP/WEIGHT” and turn the switch to set the temperature.
4. Press “TIME” and turn the switch to set the cooking time.
5. Press “START”. The oven starts working and the LED begins to count down time. The icon
will light.
6. When cooking is finished, it will beep 3 times, and the LED will turn back to waiting
state.
Heat from below
1. Press “FUNCTION”, and the icon will light.
2. Turn the switch to select heat from below, and the icon will light.
3. Press “TEMP/WEIGHT” and turn the switch to set the temperature.
4. Press “TIME” and turn the switch to set the cooking time.
5. Press “START”. The oven starts working, and the LED begins to count down time. The
icon will light.
6. When cooking is finished, it will beep 3 times, and the LED will turn back to waiting
state.
35