Gastroback 41408 Design Mincer Pro M - Manual (Page 18)

42
3. Grasp the cutter housing with one hand, then press the release button near the gear hole
in the front plate of the appliance. (See: Knowing Your Design Mincer)
4. With the release button pressed, unlock the cutter housing by turning it clockwise. Then
pull the cutter housing out of the motor housing.
5. Unscrew the screw ring and, thereafter, hold the cutter housing close over a plastic bowl
or kitchen sink and carefully turn the cutter housing with the outlet downwards. This way, the
parts within the cutter housing will fall out.
Possibly, for this you must impress the gear of the worm shaft in the cutter housing.
Cleaning the Appliance
WARNING: The edges of the cutter blade are very sharp. Handle with care to avoid injuries.
Do not use any abrasive cleaners, cleaning pads (e.g. metal scouring pads), or any corrosi-
ve chemicals (e.g. bleach) for cleaning the appliance or any parts of it, to avoid damage to
the surfaces. Do not immerse the motor housing or power cord in water or any other liquid.
Do not spill or drip any liquids on the motor housing, or on the power cord to avoid risk of
fire and electric shock. Do not use violence!
Do not place the appliance or any part of it in an automatic dishwasher!
1. Clean pusher, tablet, cutter housing, worm shaft, and screw ring, as well as any used tools
with warm dish-water and a nylon brush. If there are any tools within the pusher, take the
tools out first. Stubborn residues on the surfaces can be removed better by soaking in warm
dishwater for some minutes.
2. Moisture a clean cloth or soft sponge with a little warm dishwater and carefully wipe the
exterior of the appliance and the power cord.
WARNING: Always ensure that the appliance and all parts of it are out of reach of young
children.
3. Thoroughly dry the motor housing and all parts, and let dry naturally for about half an
hour out of reach of young children.
4. It is good advice to lubricate the grinding discs and cutter blade with some vegetable oil.
Storage
WARNING: Always switch OFF completely (ON/OFF button and power switch), unplug
and clean the appliance and all its parts before storing (see: Care and Cleaning).
Ensure to store the appliance where it is clean, dry and safe from frost, direct sunlight and
inadmissible strain (mechanical or electric shock, heat, moisture) and where it is out of reach
of young children. Place the appliance on a clean and stable surface, where it can not fall.
Do not place any hard or heavy objects on the appliance or any part of it.
Always handle the power cord with care. Power cords may never be knotted, twisted,
pulled, strained or squeezed.
Do not use any parts or tools of the appliance for any other purpose than operating the
appliance. It is a good advice to store the parts and accessories of the appliance with the
appliance.
1. Always clean the appliance and its parts before storage (see: Care and Cleaning).